Invited Articles

  1. Y. Kanno and I. Takewaki:
    Dynamic steady-state analysis of structures under uncertain harmonic loads via semidefinite program.
    In: A.K. Belyaev and R.S. Langley (eds.), IUTAM Symposium on the Vibration Analysis of Structures with Uncertainties, Springer, 2011, Dordrecht, pp.99-112.
    (published article)

  2. Y. Kanno and I. Takewaki:
    Semidefinite programming for uncertain linear equations in static analysis of structures.
    Special Issue of Computer Methods in Applied Mechanics and Engineering, 198 (1), pp.102-115 (2008).
    (published article)

  3. Y. Kanno and I. Takewaki:
    Ellipsoidal bounds for static response of framed structures against interactive uncertainties.
    Inaugural Issue of Interaction and Multiscale Mechanics: an International Journal, 1 (1), pp.103-121 (2007).
    (published article)

Books

  1. 寒野 善博：
    『最適化手法入門（データサイエンス入門シリーズ）』． 駒木 文保 編，講談社（2019）．
    (内容紹介のページ) (講談社サイエンティフィックのサーポート・ページ) (出版社のページ) (アマゾンのページ)

  2. 寒野 善博，土谷 隆：
    『最適化と変分法（東京大学工学教程 基礎系 数学）』． 東京大学工学教程編纂委員会 編，丸善出版（2014）．
    (内容紹介のページ) (アマゾンのページ)

  3. Yoshihiro Kanno:
    Nonsmooth Mechanics and Convex Optimization. CRC Press, Boca Raton (2011).
    (support page)
    (publisher's page) (Amazon's page) (アマゾンのページ)

Book Chapters

  1. [分担執筆] 日本建築学会（編）,
    応用力学シリーズ14
    『構造最適化の最近の発展と設計への応用事例』（第3章：最適化・最適設計入門）,
    丸善出版, 2020, pp.24-42.

  2. [分担執筆] 日本建築学会（編）,
    応用力学シリーズ13
    『建築構造における強非線形問題への数値解析による挑戦』（第8章：接触問題）,
    丸善出版, 2018, pp.241-264.

  3. [分担執筆] 日本応用数理学会（監修），薩摩 順吉，大石 進一，杉原 正顯（編集）,
    『応用数理ハンドブック』（トラス構造の最適設計：大崎 純，寒野 善博）,
    朝倉書店, 2013, pp.534-537.

  4. [分担執筆] 日本建築学会（編）,
    応用力学シリーズ12
    『建築構造物における冗長性とロバスト性』（第4章：ロバスト性と冗長性の定量的評価法）,
    丸善出版, 2013, pp.43-58.

  5. [分担執筆] 茨木 俊秀, 片山 徹, 藤重 悟（監修）, 太田 快人, 酒井 英昭, 高橋 豊, 田中 利幸, 永持 仁, 福島 雅夫（編集） ,
    『数理工学事典』（半正定値計画問題，2次錐計画問題）,
    朝倉書店, 2011, pp.511-517.

  6. Y. Kanno and I. Takewaki:
    Chapter 17: Maximum robustness design of trusses via semidefinite programming.
    In: Y. Tsompanakis, N.D. Lagaros, and M. Papadrakakis (eds.), Structural Design Optimization Considering Uncertainties, Taylor & Francis, 2008, Leiden, The Netherlands, pp.471-498.

  7. M. Ohsaki and Y. Kanno:
    Chapter 21: Semidefinite programming for structural optimization.
    In: Arora, J.S. (ed.), Optimization of Structural and Mechanical Systems, World Scientific Publishing, 2007, Singapore, pp.541-567.

Journal Articles

  1. Y. Kanno:
    Data-driven confidence bound for structural response using segmented least squares: a mixed-integer programming approach.
    Japan Journal of Industrial and Applied Mathematics, to appear.

  2. Y. Kanno:
    Computation-with-confidence for static elasticity: data-driven approach with order statistics.
    Zeitschrift für Angewandte Mathematik und Mechanik, 103, e202100482 (2023).
    (published article)

  3. Y. Kanno:
    Quasi-static frictional contact analysis free from solutions of linear equations: an approach based on primal-dual algorithm.
    JSIAM Letters, 15, pp.49-52 (2023).
    (published article)

  4. Z. Zhang, Y. Kanno, R. Feng:
    Collapse-resistance optimization of fabricated single-layer grid shell based on sequential approximate optimization.
    Structural and Multidisciplinary Optimization, 66, Article No. 153 (2023).
    (published article) (view)

  5. A. Nishioka, Y. Kanno:
    Smoothing inertial method for worst-case robust topology optimization under load uncertainty.
    Structural and Multidisciplinary Optimization, 66, Article No. 82 (2023).
    (published article) (view)

  6. A. Nishioka, Y. Kanno:
    Inertial projected gradient method for large-scale topology optimization.
    Japan Journal of Industrial and Applied Mathematics, 40, pp.877-905 (2023).
    (published article) (view)

  7. Y. Kanno:
    Accelerated proximal gradient method for bi-modulus static elasticity.
    Optimization and Engineering, 23, pp.453-477 (2022).
    (published article) (view)
    (correction)

  8. Y. Kanno:
    Primal-dual algorithm for quasi-static contact problem with Coulomb's friction.
    Journal of the Operations Research Society of Japan, 65, pp.1-22 (2022).
    (published article)

  9. Y. Kanno:
    Structural reliability under uncertainty in moments: distributionally-robust reliability-based design optimization.
    Japan Journal of Industrial and Applied Mathematics, 39, pp.195-226 (2022).
    (published article) (view)
    Errata: In eqs. (32d) and (32e), "w" shoule be "W".

  10. Y. Kanno:
    Alternating minimization for data-driven computational elasticity from experimental data: kernel method for learning constitutive manifold.
    Theoretical and Applied Mechanics Letters, 11, 100289 (2021).
    (published article)

  11. A. Nishioka, Y. Kanno:
    Accelerated projected gradient method with adaptive step size for compliance minimization problem.
    JSIAM Letters, 13, pp.33-36 (2021).
    (published article)

  12. Y. Kanno:
    A kernel method for learning constitutive relation in data-driven computational elasticity.
    Japan Journal of Industrial and Applied Mathematics, 38, pp.39-77 (2021).
    (published article) (view)
    supplementary material: (presentation at WCCM-ECCOMAS 2020)

  13. Y. Kanno:
    Robust optimization of structures subjected to frictionless unilateral contact with uncertain initial gaps.
    Mechanical Engineering Letters, 6, 20-00224 (2020).
    (published article)

  14. Y. Kanno:
    A note on a family of proximal gradient methods for quasi-static incremental problems in elastoplastic analysis.
    Theoretical and Applied Mechanics Letters, 10, pp.315-320 (2020).
    (published article)

  15. S. Fukasawa, Y. Kanno:
    Numerical simulation of base-isolated buildings in collisions with surrounding moat walls during earthquakes: a nonsmooth mechanics approach.
    Optimization and Engineering, 21, pp.1423-1457 (2020).
    (published article) (view)

  16. Y. Kanno:
    An accelerated Uzawa method for application to frictionless contact problem.
    Optimization Letters, 14, pp.1845-1854 (2020).
    (published article) (view)

  17. W. Shimizu, Y. Kanno:
    A note on accelerated proximal gradient method for elastoplastic analysis with Tresca yield criterion.
    Journal of the Operations Research Society of Japan, 63, pp.78-92 (2020).
    (published article)

  18. Y. Kanno:
    On three concepts in robust design optimization: absolute robustness, relative robustness, and less variance.
    Structural and Multidisciplinary Optimization, 62, pp.979-1000 (2020).
    (published article) (view)

  19. Y. Kanno:
    Dimensionality reduction enhances data-driven reliability-based design optimizer.
    Journal of Advanced Mechanical Design, Systems, and Manufacturing, 14, Article No. 19-00200 (2020).
    (published article)

  20. Y. Kanno:
    Exploiting Lagrange duality for topology optimization with frictionless unilateral contact.
    Japan Journal of Industrial and Applied Mathematics, 37, pp.25-48 (2020).
    (published article) (view)
    (日本語の口頭発表 at JSME D&S 2019)

  21. Y. Kanno, M. Puvača, Z. Tomljanović, N. Truhar:
    Optimization of damping positions in a mechanical system.
    Rad HAZU, Matematičke Znanosti, 23, pp.141-157 (2019).
    (published article)

  22. 藤田 慎之輔，寒野 善博：
    シグモイド関数を用いたシェル構造物の形状・板厚・位相同時最適化．
    日本機械学会論文集, 85 (No.872), Article No.18-00160 (2019).
    (published article)

  23. Y. Kanno:
    Mixed-integer programming formulation of a data-driven solver in computational elasticity.
    Optimization Letters, 13, pp.1505-1514 (2019).
    (published article) (view)

  24. Y. Kanno:
    A data-driven approach to non-parametric reliability-based design optimization of structures with uncertain load.
    Structural and Multidisciplinary Optimization, 60, pp.83-97 (2019).
    (published article) (view)
    supplementary material: (presentation at WCSMO 2019)

  25. Y. Kanno:
    Intrinsic formulation and Lagrange duality for elastic cable networks with geometrical nonlinearity.
    Journal of Elasticity, 134, pp.193-217 (2019).
    (published article) (view)

  26. K. Yonekura, Y. Kanno:
    A heuristic method using Hessian matrix for fast flow topology optimization.
    Journal of Optimization Theory and Applications, 180, 671-681 (2019).
    (published article) (view)

  27. S. Kitayama, K. Tamada, Y. Kanno:
    Nonlinear prediction using radial basis function network incorporating coordinate transformation.
    Mechanical Engineering Letters, 5, 18-00517 (2019).
    (published article)

  28. R. Watada, M. Ohsaki, Y. Kanno:
    Group theoretic approach to large-deformation property of three-dimensional bar-hinge mechanism.
    Japan Journal of Industrial and Applied Mathematics, 36, pp.177-208 (2019).
    (published article) (view)

  29. Y. Kanno:
    Alternating direction method of multipliers as simple heuristic for topology optimization of a truss with uniformed member cross-sections.
    Journal of Mechanical Design (ASME), 141, Article No. 011403 (2019).
    (published article)
    supplementary materials: (日本語の口頭発表 at OPTIS 2018)

  30. Y. Kanno:
    Data-driven computing in elasticity via kernel regression.
    Theoretical and Applied Mechanics Letters, 8, pp.361-365 (2018).
    (published article)
    (Matlab code)

  31. Y. Kanno:
    Simple heuristic for data-driven computational elasticity with material data involving noise and outliers: A local robust regression approach.
    Japan Journal of Industrial and Applied Mathematics, 35, pp.1085-1101 (2018).
    (published article) (view)

  32. M. Ohsaki, Y. Kanno, Y. Yamaoka:
    Second-order cone programming approach to design of linkage mechanisms with arbitrarily inclined hinges.
    Journal of Mechanical Design (ASME), 140, Article No. 102301 (2018).
    (published article)

  33. Y. Kanno:
    Robust truss topology optimization via semidefinite programming with complementarity constraints: A difference-of-convex programming approach.
    Computational Optimization and Applications, 71, pp.403-433 (2018).
    (published article) (view)
    supplementary material: (presentation at WCSMO 2017) (日本語の口頭発表 at 日本OR学会 2018春季)

  34. Y. Kanno, S. Kitayama:
    Alternating direction method of multipliers as a simple effective heuristic for mixed-integer nonlinear optimization.
    Structural and Multidisciplinary Optimization, 58, pp.1291-1295 (2018).
    (published article) (view)
    supplementary material: (presentation at ACSMO 2018) (日本語の口頭発表 at 日本OR学会 2018秋季)

  35. Y. Kanno, S. Fujita:
    Alternating direction method of multipliers for truss topology optimization with limited number of nodes: A cardinality-constrained second-order cone programming approach.
    Optimization and Engineering, 19, pp.327-358 (2018).
    (published article) (view)
    supplementary material: (presentation at IASS 2017)

  36. W. Shimizu, Y. Kanno:
    Accelerated proximal gradient method for elastoplastic analysis with von Mises yield criterion.
    Japan Journal of Industrial and Applied Mathematics, 35, pp.1-32 (2018).
    (published article) (view)
    supplementary material: (presentation at COMPLAS 2017)

  37. Y. Kanno, S. Fujita, Y. Ben-Haim:
    Structural design for earthquake resilience: Info-gap management of uncertainty.
    Structural Safety, 69, pp.23-33 (2017).
    (published article)

  38. K. Yonekura, Y. Kanno:
    Topology optimization method for interior flow based on transient information of the lattice Boltzmann method with a level-set function.
    Japan Journal of Industrial and Applied Mathematics, 34, pp.611-632 (2017).
    (published article) (view)

  39. Y. Kanno, H. Yamada:
    A note on truss topology optimization under self-weight load: mixed-integer second-order cone programming approach.
    Structural and Multidisciplinary Optimization, 56, pp.221-226 (2017).
    (published article) (view)

  40. K. Fujita, K. Yasuda, Y. Kanno, I. Takewaki:
    Robustness evaluation of elastic-plastic base-isolated high-rise buildings under critical double impulse.
    Frontiers in Built Environment (Specialty Section: Earthquake Engineering), 3, Article No. 31 (2017).
    (published article)

  41. Y. Kanno, K. Yasuda, K. Fujita, I. Takewaki:
    Robustness of SDOF elastoplastic structure subjected to double-impulse input under simultaneous uncertainties of yield deformation and stiffness.
    International Journal of Non-Linear Mechanics, 91, pp.151-162 (2017).
    (published article)

  42. Y. Kanno:
    Redundancy optimization of finite-dimensional structures: concept and derivative-free algorithm.
    Journal of Structural Engineering (ASCE), 143, Article No. 04016151 (2017).
    (published article) (arXiv: 1606.04670)
    supplementary material: (presentation at EUROMECH Colloquium 584)

  43. Y. Kanno:
    A fast first-order optimization approach to elastoplastic analysis of skeletal structures.
    Optimization and Engineering, 17 (4), pp.861-896 (2016).
    (published article) (view)

  44. T. Yamaguchi and Y. Kanno:
    Ellipsoidal load-domain shakedown analysis with von Mises yield criterion: a robust optimization approach.
    International Journal for Numerical Methods in Engineering, 107 (13), pp.1136-1144 (2016).
    (published article)
    supplementary material: (presentation at ETAMM 2016)

  45. Y. Kanno, I. Takewaki:
    Robustness analysis of elastoplastic structure subjected to double impulse.
    Journal of Sound and Vibration, 383, pp.309-323 (2016).
    (published article)

  46. Y. Kanno:
    Mixed-integer second-order cone programming for global optimization of compliance of frame structure with discrete design variables.
    Structural and Multidisciplinary Optimization, 54 (2), pp.301-316 (2016).
    (published article) (view)

  47. Y. Kanno:
    A note on formulations of static shakedown analysis with bounded kinematic hardening.
    Mechanics Research Communications, 74, pp.57-59 (2016).
    (published article)

  48. 米倉 一男，寒野 善博：
    格子ボルツマン法を用いた流れ場のトポロジー最適化において部分的にNewton 法を用いることによる収束速度の向上．
    日本機械学会論文集, 82 (No.833), Article No.15-00337 (2016).
    (published article)

  49. S. Yamada and Y. Kanno:
    Relaxation approach to topology optimization of frame structure under frequency constraint.
    Structural and Multidisciplinary Optimization, 53 (4), pp.731-744 (2016).
    (published article) (view)

  50. Y. Kanno:
    Global optimization of trusses with constraints on number of different cross-sections: A mixed-integer second-order cone programming approach.
    Computational Optimization and Applications, 63 (1), pp.203-236 (2016).
    (published article) (view)
    supplementary material: (presentation at WCSMO11)

  51. R. Hirota and Y. Kanno:
    Optimal design of periodic frame structures with negative thermal expansion via mixed integer programming.
    Optimization and Engineering, 16 (4), pp.439-461 (2015).
    (published article) (view)

  52. D. Hashimoto and Y. Kanno:
    A semidefinite programming approach to robust truss topology optimization under uncertainty in locations of nodes.
    Structural and Multidisciplinary Optimization, 51 (2), pp.439-461 (2015).
    (published article) (view)
    supplementary material: (presentation at CJK-OSM8)

  53. K. Yonekura and Y. Kanno:
    A flow topology optimization method for steady state flow using transient information of flow field solved by lattice Boltzmann method.
    Structural and Multidisciplinary Optimization, 51 (1), pp.159-172 (2015).
    (published article) (view)
    (erratum) (view)

  54. M. Ohsaki, Y. Kanno, and S. Tsuda:
    Linear programming approach to design of spatial link mechanism with partially rigid joints.
    Structural and Multidisciplinary Optimization, 50 (6), pp.945-956 (2014).
    (published article) (view)

  55. R. Kureta and Y. Kanno:
    A mixed integer programming approach to designing periodic frame structures with negative Poisson's ratio.
    Optimization and Engineering, 15 (3), pp.773-800 (2014).
    (published article) (view)
    supplementary materials: (presentation at WCCM/ECCM/ECFD 2014) (web page)

  56. Y. Kanno:
    Worst-case load in plastic limit analysis of frame structures.
    Journal of Mechanics of Materials and Structures, 8 (8-10), pp.415-439 (2013).
    (published article)

  57. Y. Kanno:
    Damper placement optimization in a shear building model with discrete design variables: A mixed-integer second-order cone programming approach.
    Earthquake Engineering and Structural Dynamics, 42 (11), pp.1657-1676 (2013).
    (published article)
    supplementary material: (presentation at ICOVP 2013)

  58. Y. Kanno:
    Exploring new tensegrity structures via mixed integer programming.
    Structural and Multidisciplinary Optimization, 48 (1), pp.95-114 (2013).
    (published article) (view)

  59. Y. Kanno:
    Topology optimization of tensegrity structures under compliance constraint: A mixed integer linear programming approach.
    Optimization and Engineering, 14 (1), pp.61-96 (2013).
    (published article) (view)

  60. Y. Kanno:
    Topology optimization of tensegrity structures under self-weight loads.
    Journal of the Operations Research Society of Japan, 55 (2), pp.125-145 (2012).
    (published article)

  61. Y. Kanno:
    Worst scenario detection in limit analysis of trusses against deficiency of structural components.
    Engineering Structures, 42, pp.33-42 (2012).
    (published article)
    supplementary material: (presentation at APSSRA 2012)

  62. K. Yonekura and Y. Kanno:
    Second-order cone programming with warm start for elastoplastic analysis with von Mises yield criterion.
    Optimization and Engineering, 13 (2), pp.181-218 (2012).
    (published article) (view)

  63. Y. Kanno and Y. Ben-Haim:
    Redundancy and robustness, or, when is redundancy redundant?
    Journal of Structural Engineering (ASCE) (Special Issue: Commemorating 10 Years of Research since 9/11), 137 (9), pp.935-945 (2011).
    (published article)

  64. Y. Kanno:
    An implicit formulation of mathematical program with complementarity constraints for application to robust structural optimization.
    Journal of the Operations Research Society of Japan, 54 (2 & 3), pp.65-85 (2011).
    (published article)
    supplementary material: (presentation at EngOpt 2010)

  65. R. Watada, M. Ohsaki, and Y. Kanno:
    Non-uniqueness and symmetry of optimal topology of a shell for minimum compliance.
    Structural and Multidisciplinary Optimization, 43 (4), pp.459-471 (2011).
    (published article) (view)

  66. Y. Kanno and M. Ohsaki:
    A non-interior implicit smoothing approach to complementarity problems for frictionless contacts.
    Computer Methods in Applied Mechanics and Engineering, 200 (9-12), pp.1176-1185 (2011).
    (published article)
    supplementary materials: (movie of ex. in sec.5.2) (movie of ex. in sec.5.3) (日本語の口頭発表 at OPTIS 2010)

  67. K. Yonekura and Y. Kanno:
    Global optimization of robust truss topology via mixed integer semidefinite programming.
    Optimization and Engineering, 11 (3), pp.355-379 (2010).
    (published article) (view)
    supplementary materials: (more examples) (日本語の口頭発表 at 59th NCTAM)

  68. Y. Kanno and X. Guo:
    A mixed integer programming for robust truss topology optimization with stress constraints.
    International Journal for Numerical Methods in Engineering, 83 (13), pp.1675-1699 (2010).
    (published article)
    supplementary material: (presentation at CJK-OSM6)

  69. R. Fujita and Y. Kanno:
    Enumeration of all wedged equilibrium configurations in contact problem with Coulomb friction.
    Computer Methods in Applied Mechanics and Engineering, 199 (17-20), pp.1202-1215 (2010).
    (published article)
    supplementary materials: (color figures) (presentation at ECCM 2010)

  70. S. Ehara and Y. Kanno:
    Topology design of tensegrity structures via mixed integer programming.
    International Journal of Solids and Structures, 47 (5), pp.571-579 (2010).
    (published article)
    supplementary material: (presentation at CODE2009)

  71. K. Murota, Y. Kanno, M. Kojima, and S. Kojima:
    A numerical algorithm for block-diagonal decomposition of matrix *-algebras with application to semidefinite programming.
    Japan Journal of Industrial and Applied Mathematics, 27 (1), pp.125-160 (2010).
    (published article) (view)
    supplementary material: (presentation at CJK-OSM5)

  72. T. Miyamura, Y. Kanno, and M. Ohsaki:
    Combined interior-point method and semismooth Newton method for frictionless contact problems.
    International Journal for Numerical Methods in Engineering, 81 (6), pp.701-727 (2010).
    (published article)
    supplementary materials: (日本語の口頭発表 at 第19回計算力学講演会)

  73. Y. Kanno and I. Takewaki:
    Semidefinite programming for dynamic steady-state analysis of structures under uncertain harmonic loads.
    Computer Methods in Applied Mechanics and Engineering, 198 (41-44), pp.3239-3261 (2009).
    (published article)

  74. T. Miyamura, Y. Kanno, and M. Ohsaki:
    A practical variant of the semismooth Newton method for frictionless contact problems.
    Journal of Computational Science and Technology, 3 (1), pp.54-65 (2009).
    (published article)

  75. Y. Kanno and M. Ohsaki:
    Optimization-based stability analysis of structures under unilateral constraints.
    International Journal for Numerical Methods in Engineering, 77 (1), pp.90-125 (2009).
    (published article)

  76. M. Ohsaki and Y. Kanno:
    Stability analysis of cable--bar structures by inverse-power method for eigenvalue analysis with penalization.
    International Journal of Solids and Structures, 45 (14-15), pp.4264-4273 (2008).
    (published article)

  77. Y. Matsuda and Y. Kanno:
    Robustness analysis of structures based on plastic limit analysis with uncertain loads.
    Journal of Mechanics of Materials and Structures, 3 (2), pp.213-242 (2008).
    (for printing) (for screen)

  78. Y. Kanno and I. Takewaki:
    Worst-case plastic limit analysis of trusses under uncertain loads via mixed 0-1 programming.
    Journal of Mechanics of Materials and Structures, 2 (2), pp.245-273 (2007).
    (for printing) (for screen)
    supplementary materials: (日本語の口頭発表 at OPTIS 2006)

  79. Y. Kanno and J.A.C. Martins:
    Arc-length method for frictional contact problems using mathematical programming with complementarity constraints.
    Journal of Optimization Theory and Applications, 131 (1), pp.89-113 (2006).
    (published article) (view)
    supplementary materials: (presentation at CJK-OSM3)

  80. Y. Kanno and I. Takewaki:
    Sequential semidefinite program for maximum robustness design of structures under load uncertainties.
    Journal of Optimization Theory and Applications, 130 (2), pp.265-287 (2006).
    (published article) (view)
    supplementary material: (presentation at WCSMO6) (日本語の口頭発表 at OPTIS 2004)

  81. Y. Kanno and I. Takewaki:
    Confidence ellipsoids for static response of trusses with load and structural uncertainties.
    Computer Methods in Applied Mechanics and Engineering, 196 (1-3), pp.393-403 (2006).
    (published article)
    supplementary material: (presentation at CJK-OSM4)

  82. T. Ariga, Y. Kanno, and I. Takewaki:
    Resonant behavior of base-isolated high-rise buildings under long-period ground motions.
    The Structural Design of Tall and Special Buildings, 15 (3), pp.325-338 (2006).
    (published article)

  83. Y. Kanno and I. Takewaki:
    Robustness analysis of trusses with separable load and structural uncertainties.
    International Journal of Solids and Structures, 43 (9), pp.2646-2669 (2006).
    (published article)

  84. Y. Kanno and M. Ohsaki:
    Contact analysis of cable networks by using second-order cone programming.
    SIAM Journal on Scientific Computing, 27 (6), pp.2032-2052 (2006).
    (published article)

  85. J.Y. Zhang, M. Ohsaki, and Y. Kanno:
    A direct approach to design of geometry and forces of tensegrity systems.
    International Journal of Solids and Structures, 43 (7-8), pp.2260-2278 (2006).
    (published article)

  86. Y. Kanno, J.A.C. Martins, and A. Pinto da Costa:
    Three-dimensional quasi-static frictional contact by using second-order cone linear complementarity problem.
    International Journal for Numerical Methods in Engineering, 65 (1), pp.62-83 (2006).
    (published article)
    supplementary material: (日本語の口頭発表 at MPSシンポジウム2005)

  87. Y. Kanno and M. Ohsaki:
    Minimum principle of complementary energy for nonlinear elastic cable networks with geometrical nonlinearities.
    Journal of Optimization Theory and Applications, 126 (3), pp.617-641 (2005).
    (published article) (view)

  88. K. Ikeda, M. Ohsaki, and Y. Kanno:
    Imperfection sensitivity of hilltop branching points of systems with dihedral group symmetry.
    International Journal of Non-Linear Mechanics, 40 (5), pp.755-774 (2005).
    (published article)

  89. Y. Kanno and M. Ohsaki:
    Minimum principle of complementary energy of cable networks by using second-order cone programming.
    International Journal of Solids and Structures, 40 (17), pp.4437-4460 (2003).
    (published article)
    supplementary material: (presentation at CJK-OSM2)

  90. Y. Kanno, M. Ohsaki, and J. Ito:
    Large-deformation and friction analysis of nonlinear elastic cable networks by second-order cone programming.
    International Journal for Numerical Methods in Engineering, 55 (9), pp.1079-1114 (2002).
    (published article)
    supplementary material: (presentation at IASS 2001)

  91. Y. Kanno, M. Ohsaki, and N. Katoh:
    Symmetricity of the solution of semidefinite program.
    Structural and Multidisciplinary Optimization, 24 (3), pp.225-232 (2002).
    (published article) (view)
    supplementary material: (presentation at WCSMO4)

  92. Y. Kanno, M. Ohsaki, K. Murota, and N. Katoh:
    Group symmetry in interior-point methods for semidefinite program.
    Optimization and Engineering, 2 (3), pp.293-320 (2001).
    (published article) (view)
    supplementary materials: (日本語の口頭発表 at 京都大学数理解析研究所・研究集会「数理最適化の理論とアルゴリズム」)

  93. Y. Kanno, M. Ohsaki, and N. Katoh:
    Sequential semidefinite programming for optimization of framed structures under multimodal buckling constraints.
    International Journal of Structural Stability and Dynamics, 1 (4), pp.585-602 (2001).
    (published article)

  94. Y. Kanno and M. Ohsaki:
    Necessary and sufficient conditions for global optimality of eigenvalue optimization problems.
    Structural and Multidisciplinary Optimization, 22 (3), pp.248-252 (2001).
    (published article) (view)

  95. M. Ohsaki, K. Fujisawa, N. Katoh, and Y. Kanno:
    Semi-definite programming for topology optimization of trusses under multiple eigenvalue constraints.
    Computer Methods in Applied Mechanics and Engineering, 180 (1-2), pp. 203-217 (1999).
    (published article)

Technical Reports

  1. S. Ozaki and Y. Kanno:
    Design of Compliant Mechanisms with Standardized Beam Elements via Mixed-Integer Programming.
    METR Research Report 2015-08, March 2015.

  2. Y. Kanno and M. Ohsaki:
    Eigenvalue Optimization of Structures via Polynomial Semidefinite Programming.
    METR Research Report 2007-31, May 2007.

  3. Y. Kanno and M. Ohsaki:
    Semidefinite Programming for Finite Element Analysis of Isotropic Materials with Unilateral Constitutive Laws.
    AIS Research Report 04-02, October 2004.

  4. Y. Kanno and I. Takewaki:
    Direct Evaluation of Robustness Functions of Trusses associated with Stress Constraints.
    BGE Research Report 04-03, June 2004.

  5. M. Ohsaki and Y. Kanno:
    Form-Finding of Cable Domes with Specified Stresses.
    AIS Research Report 03-03, March 2003.

日本建築学会 論文集

  1. 藤田 慎之輔，寒野 善博：
    非線形弾性材料からなるトラスの釣合い解析法への加速勾配法の適用．
    日本建築学会構造系論文集, Vol.84, No.763, pp.1223-1230 (2019).
    (published article)

  2. 藤田 慎之輔，寒野 善博：
    部材長さと接合部数に上限値を設けた骨組の大域的トポロジー最適化：混合整数2次錐計画による方法．
    日本建築学会構造系論文集, Vol.83, No.745, pp.451-458 (2018).
    (published article)

  3. 藤田 慎之輔，寒野 善博，大崎 純：
    パラメトリック曲面として記述された極小曲面の形態創生手法．
    日本建築学会構造系論文集, Vol.82, No.738, pp.1299-1307 (2017).
    (published article)

  4. 藤田 慎之輔，寒野 善博：
    混合整数2次錐計画による3次元骨組構造物のトポロジー最適化．
    日本建築学会構造系論文集, Vol.82, No.732, pp.193-201 (2017).
    (published article)

  5. Y. Kanno:
    A note on formulations of robust compliance optimization under uncertain loads.
    日本建築学会構造系論文集, Vol.80, No.710, pp.601-607 (2015).
    (published article)
    supplementary material: (presentation at ICMR 2015)

  6. 津田 勢太，大崎 純，菊川 翔平，寒野 善博：
    部分剛接合骨組の安定性評価とメカニズムの解析．
    日本建築学会構造系論文集, Vol.78, No.686, pp.791-798 (2013).
    (published article)

  7. 寒野 善博：
    コンプライアンス制約下での構造物のロバスト性評価法．
    日本建築学会構造系論文集, Vol.77, No.671, pp.27-33 (2012).
    (published article)

  8. 寒野 善博，竹脇 出：
    剛性および外力の不確定性を考慮したトラスのロバストネス関数に対する近似アルゴリズム．
    日本建築学会構造系論文集, No.591, pp.53-60 (2005).

  9. 寒野 善博，大崎 純，藤澤 克樹，加藤 直樹：
    半正定値計画法を用いた指定座屈荷重係数を有するトラスのトポロジー最適化．
    日本建築学会構造系論文集, No.541, pp.113-119 (2001).

Dissertations

  1. 対称錐上の数理計画法に基づく力学系のエネルギー原理．
    学位論文（京都大学）, June 2002.

  2. 半正定値計画法を用いた構造物の最適設計法．
    京都大学大学院修士論文, March 2000.

  3. 多結晶体モデルを用いたラチェッティング現象の限界予測理論．
    京都大学卒業論文, March 1998.

Social Activities (Open Lectures)

  1. 寒野 善博：
    凸計画および整数計画による最適設計． 日本機械学会 講習会 No.23-108『最適設計法の基礎数理』, December 13-14, 2023, 名古屋.

  2. 横須賀 洋平，寒野 善博：
    構造生成・最適化ハンズオン． 日本建築学会『情報ワークショップ』, September 12, 2023, 京都.

  3. 寒野 善博：
    模擬講義：データサイエンス基礎． 応用基礎レベル教材と模擬講義（数理・データサイエンス教育強化拠点コンソーシアム，関東・首都圏ワークショップ）, June 24, 2021. オンライン（東京）.

  4. 寒野 善博：
    数理・データサイエンス・AIリテラシーレベルの教材について． モデルカリキュラムと実装（数理・データサイエンス教育強化拠点コンソーシアム，関東・首都圏ワークショップ）, August 5, 2020. オンライン（東京）.

  5. 寒野 善博：
    変分法と双対性． 日本機械学会 講習会 No.19-341『最適設計法の数理～最適性条件からトポロジー最適設計』, November 18, 2019, 東京.

  6. 寒野 善博：
    コンソーシアムの取組紹介：教材分科会． データサイエンス教育の普及と展開（数理・データサイエンス教育強化拠点コンソーシアム，関東・首都圏ワークショップ）, August 31, 2019. 東京.

  7. 寒野 善博：
    ロバスト最適設計． 日本機械学会 講習会 No.17-72『実践に向けた最適設計法～トポロジー最適化／ロバスト最適化編～』, September 11, 2017, 東京.

  8. 寒野 善博：
    構造最適化への招待：設計問題の数理モデリング．
    構造計画研究所 KKE Vision 2015, Tokyo, Japan, October 29, 2015.

Keynote Lectures

  1. Y. Kanno:
    State-Of-The-Art (SOTA) Panel Session: Reliability- and robustness-based design.
    The 13th World Congress of Structural and Multidisciplinary Optimization (WCSMO13), Beijing, China, May 20-24, 2019.

  2. Y. Kanno:
    Mixed-integer programming approaches to topology optimization of finite-dimensional structures.
    The Asian Congress of Structural and Multidisciplinary Optimization 2016 (ACSMO 2016), Nagasaki, Japan, May 22-26, 2016.

Invited Talks

  1. 寒野 善博：
    凸最適化における双対性とその応用．
    日本応用数理学会「数理設計」研究部会 第22回研究集会, Online (Nagoya, Japan), December 18, 2020.

  2. 寒野 善博：
    固有値の最適化と構造力学．
    大﨑純教授還暦記念ワークショップ「建築力学と数理」, Online (Kyoto, Japan), October 24, 2020.

  3. Y. Kanno:
    Design of periodic frame structures with negative thermal expansion via mixed integer programming.
    The 3rd International Workshops on Advances in Computational Mechanics (IWACOM III), Tokyo, Japan, October 12-14, 2015.

  4. 寒野 善博：
    構造物の対称性と最適化の数理．
    室田一雄教授還暦記念シンポジウム「数理工学の伝統と潮流」, Tokyo, Japan, April 11, 2015.

  5. Y. Kanno and I. Takewaki:
    Info-gap theory in the analysis of the robustness of civil structures against model error and load uncertainty.
    Workshop on Info-Gap Analysis of Engineering Systems, Newcastle-upon-Tyne, UK, September 29-30 (2005).

International Conferences

  1. A. Nishioka, Y. Kanno:
    Accelerated projected gradient method for topology optimization of heat conduction problem.
    Joint Organization of the 15th World Congress on Computational Mechanics (WCCM XV) and the 8th Asian Pacific Congress on Computational Mechanics (APCOM VIII), Online (Yokohama, Japan), July 31-August 5, 2022.

  2. Y. Kanno:
    First-order primal-dual algorithm for quasi-static unilateral contact problem with Coulomb friction.
    Joint Organization of the 15th World Congress on Computational Mechanics (WCCM XV) and the 8th Asian Pacific Congress on Computational Mechanics (APCOM VIII), Online (Yokohama, Japan), July 31-August 5, 2022.

  3. A. Nishioka, Y. Kanno:
    Smoothing method for worst-case topology optimization under load uncertainty.
    Asian Congress of Structural and Multidisciplinary Optimization 2022 (ACSMO 2022), Matsue, Japan (hybrid format), May 22-26, 2022.

  4. Y. Kanno:
    On reliability constraint when design variables follow multivariate normal distribution with uncertain mean vector and variance-covariance matrix.
    Asian Congress of Structural and Multidisciplinary Optimization 2022 (ACSMO 2022), Matsue, Japan (hybrid format), May 22-26, 2022.

  5. Y. Kanno:
    Data-driven reliability-based design optimization with dimensionality reduction.
    The 25th International Congress of Theoretical and Applied Mechanics (25th ICTAM), Online (Milano, Italy), August 22-27, 2021.

  6. A. Nishioka, Y. Kanno:
    Accelerated projected gradient method for compliance minimization problem.
    The 14th World Congress of Structural and Multidisciplinary Optimization (WCSMO14), Online (Boulder, Colorado), June 13-18, 2021.

  7. Y. Kanno:
    Robust optimization of structures under unilateral contacts with uncertain initial gaps.
    The 14th World Congress of Structural and Multidisciplinary Optimization (WCSMO14), Online (Boulder, Colorado), June 13-18, 2021.

  8. Y. Kanno:
    Extracting constitutive manifold for computational elasticity: a kernel-based method. Joint Organization of the 14th World Congress on Computational Mechanics (WCCM XIV) and the 8th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2020), Online (Paris, France), January 11-15, 2021.

  9. Y. Kanno:
    Topology optimization of structures under frictionless unilateral contact: a formulation without complementarity constraints.
    Asian Congress of Structural and Multidisciplinary Optimization 2020 (ACSMO 2020), Online (Seoul, Korea), November 23-25, 2020.

  10. Y. Kanno, M. Ohsaki, J. K. Guest:
    Unified treatment of some different fabrication-cost functions in truss topology optimization.
    Joint Organization of International Association for Shell and Spatial Structures (IASS) Annual Symposium 2019 and Structural Membranes 2019—Form and Force, Barcelona, Spain, October 7-10, 2019.

  11. Y. Kanno:
    Accelerated proximal gradient methods for incremental problems in plasticity.
    The 8th Symposium of the European Network for Nonsmooth Dynamics (ENNSD8), Montbonnot, France, September 17-18, 2019.

  12. W. Shimizu, Y. Kanno:
    Accelerated proximal gradient methods for quasistatic analysis of elastoplastic continua.
    The 30th European Conference on Operational Research (EURO 2019), Dublin, Ireland, June 23-26, 2019.

  13. Y. Kanno:
    Bridging reliability-based design optimization and robust design optimization: a data-driven approach.
    The 13th World Congress of Structural and Multidisciplinary Optimization (WCSMO13), Beijing, China, May 20-24, 2019.

  14. R. Watada, M. Ohsaki, Y. Kanno:
    Group theoretic approach to detecting finite mechanisms of bar-hinge models of retractable structures.
    The 12th Asian–Pacific Conference on Shell and Spatial Structures (APCS 2018), pp.165-173, Penang, Malaysia, October 29-31, 2018.

  15. S. Fujita, Y. Kanno:
    Global topology optimization of structural frames considering constructability.
    International Association for Shell and Spatial Structures (IASS) Annual Symposium—Creativity in Structural Design, Boston, Massachusetts, July 16-20, 2018.

  16. Y. Kanno:
    An accelerated Uzawa method for frictionless contact problems.
    The 10th European Solid Mechanics Conference (ESMC 2018), Bologna, Italy, July 2-6, 2018.

  17. Y. Kanno, S. Kitayama:
    A simple heuristic based on alternating direction method of multipliers for solving mixed-integer nonlinear optimization.
    Asian Congress of Structural and Multidisciplinary Optimization 2018 (ACSMO 2018), Dalian, China, May 21-24, 2018.

  18. Y. Kanno:
    Mixed-integer second-order cone programming for truss topology optimization with self-weight load and limitation on number of nodes.
    IEEE International Conference on Industrial Engineering and Engineering Management (IEEE IEEM2017), Singapore, December 10-13, 2017. (published article)

  19. S. Fujita, Y. Kanno:
    Optimization of shape and thickness of continuum shell structures using 2D and 3D shell elements.
    IASS Annual Symposium—Interfaces: Architecture, Engineering, Science, Hamburg, Germany, September 25-28, 2017.

  20. Y. Kanno, S. Fujita:
    A heuristic for truss topology optimization under constraint on number of nodes.
    IASS Annual Symposium—Interfaces: Architecture, Engineering, Science, Hamburg, Germany, September 25-28, 2017.

  21. W. Shimizu, Y. Kanno:
    A fast first-order optimization approach to quasistatic elastoplastic analysis with von Mises yield criterion.
    XIV International Conference on Computational Plasticity (COMPLAS 2017), Barcelona, Spain, September 5-7, 2017.

  22. S. Fujita, Y. Kanno, M. Ohsaki:
    Optimization method for creating minimal surface discretized by parametric surface.
    The 12th World Congress of Structural and Multidisciplinary Optimization (WCSMO12), Braunschweig, Germany, June 5-9, 2017.

  23. K. Yonekura, Y. Kanno:
    A fast heuristic method using Hessian matrix for fluid topology optimization.
    The 12th World Congress of Structural and Multidisciplinary Optimization (WCSMO12), Braunschweig, Germany, June 5-9, 2017.

  24. Y. Kanno:
    Robust truss topology optimization under uncertain loads by using penalty concave-convex procedure.
    The 12th World Congress of Structural and Multidisciplinary Optimization (WCSMO12), Braunschweig, Germany, June 5-9, 2017.

  25. Y. Kanno:
    Accelerated proximal gradient method for equilibrium analysis of elastoplastic spatial truss structures.
    IASS Annual Symposium—Spatial Structures in the 21st Century, Tokyo, Japan, September 26-30, 2016.

  26. Y. Kanno:
    Redundancy optimization of trusses against uncertainty in structural damage.
    EUROMECH Colloquium 584, Multi-Uncertainty and Multi-Scale Methods and Related Applications, Porto, Portugal, September 14-16, 2016.

  27. T. Yamaguchi, Y. Kanno:
    A semidefinite programming approach to static shakedown analysis with von Mises yield criterion and ellipsoidal load domain.
    Emerging Trends in Applied Mathematics and Mechanics (ETAMM 2016), Perpignan, France, May 30-June 3, 2016.

  28. K. Yonekura, Y. Kanno:
    A study of topology optimization of a flow field with time-periodic boundary conditions using the lattice Boltzmann method.
    The Asian Congress of Structural and Multidisciplinary Optimization 2016 (ACSMO 2016), Nagasaki, Japan, May 22-26, 2016.
    Kazuo Yonekura recieved the ACSMO Young Scientist Award.

  29. Y. Yamaoka, M. Ohsaki, Y. Kanno:
    Optimization approach to design of linkage mechanisms with arbitrarily inclined hinges.
    The Asian Congress of Structural and Multidisciplinary Optimization 2016 (ACSMO 2016), Nagasaki, Japan, May 22-26, 2016.

  30. Y. Kanno:
    On multiplicity of eigenvalues in robust compliance optimization under uncertain loads.
    The 3rd International Conference on Materials and Reliability (ICMR-2015), Jeju Island, Korea, November 23-25, 2015.

  31. K. Yonekura, Y. Kanno:
    A topology optimization method for a flow field using the lattice Boltzmann method considering wall boundary conditions.
    The 11th World Congress of Structural and Multidisciplinary Optimization (WCSMO11), Sydney, Australia, June 7-12, 2015.

  32. Y. Kanno:
    Truss topology optimization under constraints on number of different design variables.
    The 11th World Congress of Structural and Multidisciplinary Optimization (WCSMO11), Sydney, Australia, June 7-12, 2015.

  33. M. Hirota, Y. Kanno:
    A mixed-integer programming approach to design of periodic structures with negative thermal expansion.
    The 4th International Conference on Engineering Optimization (EngOpt 2014), Lisbon, Portugal, September 8-11, 2014.

  34. K. Yonekura, Y. Kanno:
    Topology optimization method for three-dimensional flow field using transient information of lattice Boltzmann method.
    Joint Organization of 11th World Congress on Computational Mechanics (WCCM XI), 5th European Conference on Computational Mechanics (ECCM V), and 6th European Conference on Computational Fluid Dynamics (ECFD VI), Barcelona, Spain, July 20-25, 2014.

  35. R. Kureta, Y. Kanno:
    Exploring frame structures with negative Poisson's ratio via mixed integer programming.
    Joint Organization of 11th World Congress on Computational Mechanics (WCCM XI), 5th European Conference on Computational Mechanics (ECCM V), and 6th European Conference on Computational Fluid Dynamics (ECFD VI), Barcelona, Spain, July 20-25, 2014.

  36. K. Yonekura, Y. Kanno:
    PDE formulation of topology optimization method for flow field.
    International Conference on Engineering and Applied Sciences Optimization (OPT-i), Kos Island, Greece, June 4-6, 2014.

  37. M. Ohsaki, Y. Kanno, S. Tsuda:
    Linear programming approach to design of spatial link mechanisms.
    The 8th China-Japan-Korea Joint Symposium on Optimization of Structural and Mechanical Systems (CJK-OSM8), Gyeongju, Korea, May 25-29, 2014.

  38. D. Hashimoto and Y. Kanno:
    Robust truss topology optimization under geometric uncertainties via semidefinite programming.
    The 8th China-Japan-Korea Joint Symposium on Optimization of Structural and Mechanical Systems (CJK-OSM8), Gyeongju, Korea, May 25-29, 2014.

  39. Y. Kanno:
    Generating asymmetric tensegrity structures via truss topology optimization.
    IASS Annual Symposium—Beyond the Limits of Man, Wroclaw, Poland, September 23-27, 2013.

  40. S. Tsuda, M. Ohsaki, and Y. Kanno:
    Analysis and design of deployable frames with partially rigid connections.
    IASS Annual Symposium—Beyond the Limits of Man, Wroclaw, Poland, September 23-27, 2013.

  41. Y. Kanno:
    Discrete optimization of damper placement in a shear building via mixed integer programming.
    International Conference on Vibration Problems (ICOVP 2013), Lisbon, Portugal, September 9-12, 2013.

  42. M. Ohsaki, Y. Kanno, and S. Tsuda:
    Linear programming approach to design of link mechanisms of partially rigid frames.
    The 10th World Congress of Structural and Multidisciplinary Optimization (WCSMO10), Florida, USA, May 19-24, 2013.

  43. Y. Kanno and M. Ohsaki:
    Warm-start strategy in implicit reformulation method for frictionless contact problems.
    The 8th European Solid Mechanics Conference (ESMC 2012), Graz, Austria, July 9-13, 2012.

  44. Y. Kanno:
    Design of tensegrity structures by using mixed integer programming.
    The 7th China-Japan-Korea Joint Symposium on Optimization of Structural and Mechanical Systems (CJK-OSM7), Huangshan, China, June 18-21, 2012.

  45. Y. Kanno:
    Worst-scenario of deficiency of structural elements in plastic limit analysis.
    Asian-Pacific Symposium on Structural Reliability and its Applications (APSSRA 2012), Singapore, May 23-25, 2012.

  46. Y. Kanno:
    Topology optimization of tensegrity structures based on nonsmooth mechanics.
    The 5th International Conference on Advanced Computational Methods in Engineering (ACOMEN 2011), Li'ege, Belgium, November 14-17, 2011.

  47. Y. Kanno:
    Topology optimization of tensegrity structures via mixed integer programming.
    The 9th World Congress of Structural and Multidisciplinary Optimization (WCSMO9), Shizuoka, Japan, June 13-17, 2011.

  48. Y. Kanno:
    An implicit smooth reformulation of complementarity constraints for application to robust structural optimization.
    The 2nd International Conference on Engineering Optimization (EngOpt 2010), Lisbon, Portugal, September 6-9, 2010.

  49. K. Yonekura and Y. Kanno:
    Second-order cone programming formulation for quasi-static analysis of elastoplastic structures.
    The 9th World Congress on Computational Mechanics and the 4th Asian Pacific Congress on Computational Mechanics (WCCM/APCOM 2010), Sydney, Australia, July 19-23, 2010.

  50. R. Watada, M. Ohsaki, and Y. Kanno:
    Uniqueness and symmetry of optimal thickness distribution of axisymmetric shells.
    The 6th China-Japan-Korea Joint Symposium on Optimization of Structural and Mechanical Systems (CJK-OSM6), Kyoto, Japan, June 22-25, 2010.

  51. Y. Kanno and X. Guo:
    Robust truss topology optimization with discrete design variables via mixed integer programming.
    The 6th China-Japan-Korea Joint Symposium on Optimization of Structural and Mechanical Systems (CJK-OSM6), Kyoto, Japan, June 22-25, 2010.

  52. R. Fujita and Y. Kanno:
    A numerical algorithm for enumerating all wedged configurations in contact problem with Coulomb friction.
    The 4th European Conference on Computational Mechanics (ECCM IV), Paris, France, May 16-21, 2010.

  53. S. Ehara and Y. Kanno:
    Mixed integer programming for finding tensegrity structures.
    International Conference on Computational Design in Engineering (CODE2009), Seoul, Korea, November 3-6, 2009.

  54. Y. Kanno and I. Takewaki:
    Semidefinite program for response bound analysis of structures subjected to uncertain harmonic dynamic loads.
    The 9th Japan-Korea Design Engineering Workshop (DEWS2009), Yomitan-son, Japan, October 26-27, 2009.

  55. Y. Fujii and Y. Kanno:
    Wrinkling analysis of orthotropic membranes via semidefinite programming.
    IASS 50th Anniversary Symposium—Evolution and Trends in Design, Analysis and Construction of Shell and Spatial Structures, Valencia, Spain, September 28-October 2, 2009.

  56. S. Ehara and Y. Kanno:
    A mixed 0-1 programming approach to topology-finding of tensegrity structures.
    IASS 50th Anniversary Symposium—Evolution and Trends in Design, Analysis and Construction of Shell and Spatial Structures, Valencia, Spain, September 28-October 2, 2009.

  57. Y. Kanno and I. Takewaki:
    Semidefinite programming for robustness analysis of structures under large uncertainties.
    The 10th International Conference on Structural Safety and Reliability (ICOSSAR 2009), Osaka, Japan, September 13-17, 2009.

  58. Y. Kanno and I. Takewaki:
    Dynamic steady-state analysis of structures under uncertain harmonic loads via semidefinite program.
    IUTAM Symposium on the Vibration Analysis of Structures with Uncertainties, Saint Petersburg, Russia, July 6-9, 2009.

  59. K. Yonekura and Y. Kanno:
    Global optimization of robust truss topology via mixed 0-1 semidefinite programming.
    The 8th World Congress of Structural and Multidisciplinary Optimization (WCSMO8), Lisbon, Portugal, June 1-5, 2009.

  60. Y. Kanno and M. Ohsaki:
    A sequential second-order cone programming for stability analysis of nonsmooth mechanical systems.
    The 8th World Congress of Structural and Multidisciplinary Optimization (WCSMO8), Lisbon, Portugal, June 1-5, 2009.

  61. T. Miyamura, Y. Kanno and M. Ohsaki:
    Combination of interior-point method and semismooth Newton method for large-scale frictionless contact problems.
    Joint Organization of the 8th World Congress on Computational Mechanics (WCCM8) and the 5th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008), Venice, Italy, June 30-July 4, 2008.

  62. Y. Kanno, K. Murota, M. Kojima, and S. Kojima:
    Block-diagonal decomposition of matrices based on *-algebra for structural optimization with symmetry property.
    The 5th China-Japan-Korea Joint Symposium on Optimization of Structural and Mechanical Systems (CJK-OSM5), Jeju Island, Korea, June 16-19, 2008.

  63. Y. Kanno and I. Takewaki:
    Ellipsoidal bounds for uncertainty analysis of structures by using semidefinite programming.
    The 7th International Conference on Optimization: Techniques and Applications (ICOTA7), Kobe, Japan, 12-15 December, 2007.

  64. T. Miyamura, Y. Kanno, and M. Ohsaki:
    Combination of interior-point method and semismooth Newton method for solving frictionless contact problems.
    The 3rd Asian-Pacific Congress on Computational Mechanics (APCOM 20O7), Kyoto, Japan, December 3-6, 2007.

  65. Y. Kanno and I. Takewaki:
    Confidence bounds for static response of braced frames with structural and load uncertainties.
    The 3rd Asian-Pacific Congress on Computational Mechanics (APCOM 20O7), Kyoto, Japan, December 3-6, 2007.

  66. Y. Kanno and M. Ohsaki:
    Maximization of minimal eigenvalue of structures by using sequential semidefinite programming.
    The 7th World Congress of Structural and Multidisciplinary Optimization (WCSMO7), Seoul, Korea, May 21-25, 2007.

  67. Y. Kanno and I. Takewaki:
    Global optimization algorithm for worst-case limit analysis of trusses under load uncertainties.
    The 4th International Conference on Computational Methods (ICCM 2007), Hiroshima, Japan, April 4-6, 2007.

  68. Y. Kanno and I. Takewaki:
    Ellipsoidal bounds for static response of uncertain trusses by using semidefinite programming.
    The 4th China-Japan-Korea Joint Symposium on Optimization of Structural and Mechanical Systems (CJK-OSM4), Kunming, China, November 6-9, 2006.
    Recieved the CJK-OSM Young Scientist Award.

  69. Y. Kanno and J.A.C. Martins:
    Arc-length method for frictional contact with a criterion of maximum dissipation of energy.
    The 3rd European Conference on Computational Mechanics (ECCM-2006), Lisbon, Portugal, June 5-8, 2006.

  70. Y. Kanno and I. Takewaki:
    Evaluation and maximization of robustness of trusses by using semidefinite programming.
    The 6th World Congress of Structural and Multidisciplinary Optimization (WCSMO6), Rio de Janeiro, Brazil, May 30-June 3, 2005.

  71. Y. Kanno and J.A.C. Martins:
    Arc-length method for frictional contact based on mathematical program with complementarity constraints.
    The 3rd China-Japan-Korea Joint Symposium on Optimization of Structural and Mechanical Systems (CJK-OSM3), Kanazawa, Japan, October 30-November 2, 2004.

  72. Y. Kanno, A. Pinto da Costa, and J.A.C. Martins:
    Second-order cone complementarity formulation for quasi-static incremental frictional contact problem in three-dimensional space.
    The 21st International Congress of Theoretical and Applied Mechanics (21st ICTAM), Warsaw, Poland, August 15-21, 2004.

  73. Y. Kanno, J.A.C. Martins, and A. Pinto da Costa:
    Second-order cone linear complementarity formulation of quasi-static incremental frictional contact problem.
    The 4th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2004), Jyv\"{a}skyl\"{a}, Finland, July 24-28, 2004.

  74. M. Ohsaki and Y. Kanno:
    Form-finding of cable domes with specified stresses by using nonlinear programming.
    Proc. IASS-APCS 2003, Taipei, Taiwan, October 22-25, Int. Assoc. Shell and Spatial Struct., 2003.

  75. Y. Kanno and M. Ohsaki:
    Second-order cone programming for contact analysis of cable networks.
    The 5th World Congress of Structural and Multidisciplinary Optimization (WCSMO5), Lido di Jesolo, Italy, May 19-23, 2003.

  76. Y. Kanno and M. Ohsaki:
    Second-order cone programming for complementary energy principle of cable networks.
    The 2nd China-Japan-Korea Joint Symposium on Optimization of Structural and Mechanical Systems (CJK-OSM2), Busan, Korea, November 4-8, 2002.

  77. Y. Kanno and M. Ohsaki:
    Second-order cone programming for shape analysis and form finding of cable networks.
    The 5th International Conference on Space Structures, Surrey, UK, August 19-21, 2002.

  78. Y. Kanno, M. Ohsaki, K. Murota, and N. Katoh:
    Group symmetry of search directions in interior-point method for semidefinite programming.
    New Trends in Optimization and Computational Algorithms (NTOC 2001), Kyoto, Japan, December 9-13, 2001.

  79. Y. Kanno and M. Ohsaki:
    Large deflection analysis of cable networks by second-order cone program.
    International Symposium on Theory, Design and Realization of Shell and Spatial Structures (IASS 2001), Nagoya, Japan, October 9-13, 2001.

  80. M. Ohsaki and Y. Kanno:
    Optimum design of finite dimensional systems with coincident critical point/
    The 4th World Congress of Structural and Multidisciplinary Optimization (WCSMO4), Dalian, China, June 4-8, 2001.

  81. Y. Kanno, M. Ohsaki, and N. Katoh:
    Symmetry of the solution of semidefinite program by using primal-dual interior-point method.
    The 4th World Congress of Structural and Multidisciplinary Optimization (WCSMO4), Dalian, China, June 4-8, 2001.

  82. Y. Kanno, M. Ohsaki, K. Fujisawa, and N. Katoh:
    Topology optimization for specified multiple linear buckling load factors by using semidefinite programming.
    The 1st International Conference on Structural Stability and Dynamics (ICSSD 2000), pp.267-272, Taipei, Taiwan, December 7-9, 2000.

  83. K. Fujisawa, Y. Kanno, M. Ohsaki, and N. Katoh:
    Semi-definite programming for topology optimization of trusses under multiple eigenvalue constraints.
    The 3rd World Congress of Structural and Multidisciplinary Optimization (WCSMO3), Amherst, New York, May 17-21, 1999.

Expository Articles

  1. 寒野 善博：
    構造物の最適設計における非線形最適化． オペレーションズ・リサーチ, Vol.68, No.12, pp.636-642 (2023).

  2. 寒野 善博：
    建築構造物の釣合い解析に対するデータ駆動型の手法の動向． 2022年度日本建築学会大会（北海道）・情報システム技術部門 研究協議会 資料『建築と情報—これからの建築学に向けて』, pp.42-45, September 6, 2022, 札幌. (日本建築学会の会員限定のダウンロード)

  3. 寒野 善博：
    構造最適化． 『数理科学』, No.677 (2019年11月号, 特集：最適化の数理—モデリングとアルゴリズム—), pp.21-27, サイエンス社 (2019).

  4. 寒野 善博：
    データ科学を支える最適化の動向． 2019年度日本建築学会大会（北陸）・構造部門（応用力学）パネルディスカッション資料『最適化・AI 手法で構造設計は変わるのか？』, pp.10-16, September 5, 2019, 野々市.

  5. 寒野 善博：
    ロバスト性・冗長性とレジリエンス． 2016年度日本建築学会大会（九州）・構造部門（応用力学）パネルディスカッション資料『レジリエントで高い安全性を確保する構造設計とは』, pp.13-19, August 24, 2016, 福岡. (日本建築学会の会員限定のダウンロード)

  6. 寒野 善博：
    混合整数2次錐計画を用いたトラス構造の最適設計法． 第27回RAMPシンポジウム（日本オペレーションズ・リサーチ学会）, pp.157-170, October 15-16, 2015, 浜松.

  7. 寒野 善博：
    2次錐計画の構造力学への応用． オペレーションズ・リサーチ, Vol.59, No.12, pp.725-731 (2014).

  8. 寒野 善博：
    構造物のロバスト最適化． 日本オペレーションズ・リサーチ学会・第66回シンポジウム・資料『モノづくりに活かされる知能化・最適化』, pp.25-34, September 17, 2011, 神戸.

  9. 寒野 善博：
    ロバスト性を考慮した設計． 2008年度日本建築学会大会（中国）・構造部門（応用力学）パネルディスカッション資料『建築構造設計における冗長性と頑強性の役割—リダンダンシーとロバスト性とは—』, pp.14-23, September 18-20, 2008, 広島. (日本建築学会の会員限定のダウンロード)

  10. 寒野 善博，竹脇 出：
    半正定値計画法を用いた構造物の不確定性解析． 第19回RAMPシンポジウム（日本オペレーションズ・リサーチ学会）, pp.193-207, October 25-26, 2007, 長崎.

Annual Meetings of AIJ (日本建築学会大会学術講演会(B1))

  1. 深澤 翔太，寒野 善博：
    地震時における免震構造の躯体と擁壁間の衝突現象に対する数値解析法． No.20182, September 3-6, 2019, 金沢.

  2. 藤田 慎之輔，寒野 善博：
    部材の接合の数と角度を考慮した平面骨組の大域的最適化． No.20186, September 4-6, 2018, 仙台.

  3. 寒野 善博，山田 裕通：
    混合整数2次錐計画による自重を考慮したトラス構造の位相最適化手法． No.20189, August 31-September 3, 2017, 広島.

  4. 藤田 慎之輔，寒野 善博，遠藤 啓志：
    シグモイド関数を用いたシェル構造物のトポロジー最適化（その1：板厚分布の最適化）． No.20498, August 31-September 3, 2017, 広島.

  5. 遠藤 啓志，寒野 善博，藤田 慎之輔：
    シグモイド関数を用いたシェル構造物のトポロジー最適化（その2：形状と板厚分布の同時最適化）． No.20499, August 31-September 3, 2017, 広島.

  6. 山本 発，寒野 善博，藤田 慎之輔：
    加速勾配法による大規模骨組構造の弾性解析． No.20107, August 31-September 3, 2017, 広島.

  7. 和多田 遼，大崎 純，寒野 善博：
    二面体群対称性を有する部分剛接合骨組メカニズムの大変形特性判定法． No.20130, August 31-September 3, 2017, 広島.

  8. 星野 耀，藤田 慎之輔，寒野 善博：
    柱の消失を考慮した骨組構造の部材断面の最適設計． No.20168, August 31-September 3, 2017, 広島.

  9. 寒野 善博：
    断面積の種類数制約の下でのトラス構造の大域的最適化手法． No.20193, August 24-26, 2016, 福岡.

  10. 寒野 善博：
    整数計画を用いたせん断型構造物モデルにおける粘性ダンパーの最適配置法． pp.435-436 (No.20218), August 30-September 1, 2013, 札幌.

  11. 大崎 純，寒野 善博，津田 勢太：
    展開構造のためのメカニズムの線形計画法による生成法（その1：基礎式の導出）． pp.945-946 (No.20473), August 30-September 1, 2013, 札幌.

  12. 津田 勢太，大崎 純，寒野 善博：
    展開構造のためのメカニズムの線形計画法による生成法（その2：メカニズム導出）． pp.947-948 (No.20406), August 30-September 1, 2013, 札幌.

  13. 寒野 善博：
    混合整数計画を用いたテンセグリティ構造の最適設計法． pp.903-904 (No.20452), September 12-14, 2012, 名古屋.

  14. 津田 勢太，大崎 純，菊川 翔平，寒野 善博：
    部分剛接骨組の安定性評価とメカニズムの解析（その1：釣合い行列の定式化と直交格子の解析）． pp.809-810 (No.20405), September 12-14, 2012, 名古屋.

  15. 菊川 翔平，津田 勢太，大崎 純，寒野 善博：
    部分剛接骨組の安定性評価とメカニズムの解析（その2：極限解析によるメカニズムの導出と六角形格子の解析）． pp.811-812 (No.20406), September 12-14, 2012, 名古屋.

  16. 大崎 純，寒野 善博：
    最適化手法を用いたケーブル・ストラット構造の安定解析． B1: pp.333-334, August 2009 (東北).

  17. 宮村 倫司, 寒野 善博, 大崎 純：
    内点法と試行錯誤法の組み合わせ手法による摩擦のない接触問題の求解． B1: pp.223-224, August 2007 (九州).

  18. 寒野 善博，竹脇 出：
    不確定な外力を受けるトラスの極限解析に対する大域的最適化手法． B1: pp.327-328, (slide.pdf), August 2007 (九州).

  19. 寒野 善博，竹脇 出：
    不確定な剛性および外力を有するトラスの静的応答量の楕円体による安全側評価法． B1: pp.249-250, September 2006 (関東).

  20. 伊藤 宰，竹脇 出，寒野 善博：
    建築骨組の塑性崩壊に対するロバスト性解析． B1: pp.301-302, September 2006 (関東).

  21. 寒野 善博，竹脇 出：
    半正定値計画法を用いたトラスの不確定外力に対するロバスト性最大化設計． B1: pp.343-344, September 2005 (近畿).

  22. 寒野 善博：
    均衡制約をもつ数理計画問題に基づく摩擦のある接触問題に対する弧長法． B1: pp.351-352, August 2004 (北海道).

  23. 寒野 善博，大崎 純：
    非線形計画法を用いたケーブルドームの釣合形状解析法． B1: pp.321-322, August 2002 (北陸).

  24. 寒野 善博，大崎 純：
    有限変形を考慮したケーブルネットのコンプリメンタリエネルギー最小化原理． B1: pp.345-346, September 2001 (関東).

  25. 寒野 善博，大崎 純：
    2次錐計画法を用いたすべり節点ケーブルネットの釣合形状解析法． B1: pp.327-328, September 2000 (東北).

  26. 寒野 善博，藤澤 克樹，大崎 純，加藤 直樹：
    半正定値計画法を用いた重複固有振動数を有するトラスのトポロジー最適化． B1: pp.379-380, September 1999 (中国).

  27. 寒野 善博，上谷宏二，荒木 慶一：
    多結晶体モデルを用いたラチェッティング現象の限界予測理論． B1: pp.479-480, September 1998 (九州).

National Conferences/Meetings

  1. 西岡 暁，寒野 善博：
    実行可能な補助変数をもつ平滑化加速射影勾配法の収束解析．
    日本オペレーションズ・リサーチ学会春季研究発表会, March 6-8, 2024, つくば．

  2. 寒野 善博：
    データ点からの区分的アフィン関数の生成とその計算力学での利用．
    日本応用数理学会 第20回研究部会連合発表会, March 4-6, 2024, 長岡.

  3. 寒野 善博：
    データ点からの確信度付き範囲の生成とその釣合い解析への応用．
    第46回情報・システム・利用・技術シンポジウム， 日本建築学会, December 7-8, 2023, 東京.

  4. 浅沼 達也，寒野 善博：
    離散変数を考慮した埋込磁石型同期電動機の多目的最適化に関する基礎検討．
    第33回設計工学・システム部門講演会, 日本機械学会, September 19-21, 2023, 金沢．

  5. 西岡 暁，寒野 善博：
    トラスの固有振動数最大化問題に対する平滑化法．
    第33回設計工学・システム部門講演会, 日本機械学会, September 19-21, 2023, 金沢．

  6. 寒野 善博：
    データ点からの線形弾性構成則の確信度付き範囲の生成とその応答解析への応用．
    第33回設計工学・システム部門講演会, 日本機械学会, September 19-21, 2023, 金沢．

  7. 西岡 暁，豊田 充，田中 未来，寒野 善博：
    最大一般化固有値最小化問題の数学的性質と平滑化法の収束性．
    日本オペレーションズ・リサーチ学会秋季研究発表会, September 14-15, 2023, 西宮．

  8. 寒野 善博：
    数理計画を用いた線形弾性構造物の応答範囲の確信度付き予測．
    日本オペレーションズ・リサーチ学会秋季研究発表会, September 14-15, 2023, 西宮．

  9. 寒野 善博：
    最適化概論．
    構造最適化の協創的利用, May 12, 2023, 東京.

  10. 西岡 暁，豊田 充，田中 未来，寒野 善博：
    トポロジー最適化における固有値最適化問題に対する平滑化法．
    日本応用数理学会 第19回研究部会連合発表会, March 8-10, 2023, 岡山.

  11. 寒野 善博：
    主双対アルゴリズムに基づく準静的な摩擦付き接触問題の解法．
    日本応用数理学会 第19回研究部会連合発表会, March 8-10, 2023, 岡山.

  12. 西岡 暁，寒野 善博：
    トポロジー最適化問題に対する慣性項付き射影勾配法．
    第14回最適化シンポジウム (OPTIS 2022), 日本機械学会, November 12-13, 2022, 名古屋.

  13. 寒野 善博：
    Coulomb摩擦付き接触問題に対する主双対アルゴリズム．
    第14回最適化シンポジウム (OPTIS 2022), 日本機械学会, November 12-13, 2022, 名古屋.

  14. 西岡 暁，寒野 善博：
    最悪ケースのロバストコンプライアンス最小化問題に対する平滑化法．
    第32回設計工学・システム部門講演会, 日本機械学会, September 20-22, 2022, 総社．

  15. 寒野 善博：
    カーネル法によるデータ点からの曲面の生成とその計算力学への応用．
    第32回設計工学・システム部門講演会, 日本機械学会, September 20-22, 2022, 総社．

  16. 寒野 善博：
    カーネル法による線形制約の下でのデータ点からの曲面の生成法．
    日本応用数理学会2022年度年会, September 8-10, 2022, 札幌.

  17. 寒野 善博：
    カーネル法を用いたデータ駆動型の弾性計算力学．
    第66回理論応用力学講演会, June 24-26, 2022, オンライン.

  18. 西岡 暁，寒野 善博：
    ロバストトポロジー最適化問題に対する平滑化法．
    日本オペレーションズ・リサーチ学会春季研究発表会, March 17-18, 2022, オンライン．

  19. 寒野 善博：
    免震構造の躯体と擁壁間の衝突現象の数値解析の事例．
    シンポジウム『建築構造に対する数値解析利用の問題点・留意点および事例』, March 4, 2022, 東京.

  20. 寒野 善博：
    不定な線形方程式に従うデータ点からの曲面の生成法．
    第44回情報・システム・利用・技術シンポジウム， 日本建築学会, December 9-10, 2021, ハイブリッド（京都）.

  21. 寒野 善博：
    圧縮と引張とで材料定数が異なる弾性体の釣合い解析に対する加速射影勾配法．
    第34回計算力学講演会 (CMD2021), 日本機械学会, September 21-13, 2021, オンライン（札幌）.

  22. 西岡 暁，寒野 善博：
    トポロジー最適化問題に対する加速射影勾配法．
    日本オペレーションズ・リサーチ学会秋季研究発表会, September 16-17, 2021, オンライン（福岡）．

  23. 寒野 善博：
    期待値と分散が不確かな正規分布に対する信頼性制約について．
    第31回設計工学・システム部門講演会, 日本機械学会, September 15-17, 2021, オンライン（国分寺）．

  24. 寒野 善博：
    最適化概論．
    構造最適化の最近の発展と設計への応用事例, May 11, 2021, オンライン（東京）.

  25. 西岡 暁，寒野 善博：
    平均コンプライアンス最小化問題への加速射影勾配法の適用．
    日本応用数理学会 第17回研究部会連合発表会, March 4-5, 2021, オンライン.

  26. 寒野 善博：
    カーネル法に基づくデータ点からの曲面の生成法．
    第43回情報・システム・利用・技術シンポジウム， 日本建築学会, December 10-11, 2020, オンライン（京都）.

  27. 寒野 善博：
    カーネル法を用いたデータ点からの曲面の生成法．
    日本応用数理学会2020年度年会, September 8-10, 2020, オンライン（松山）.

  28. 寒野 善博：
    順序統計量に基づくデータ駆動型の信頼性最適設計法．
    第30回設計工学・システム部門講演会, 日本機械学会, November 26-28, 2020, オンライン（京都）．

  29. 寒野 善博：
    摩擦のない接触下のトポロジー最適化におけるLagrange双対性について．
    第42回情報・システム・利用・技術シンポジウム， 日本建築学会, December 12-13, 2019, 東京.

  30. 寒野 善博：
    摩擦なし接触を伴う構造物のトポロジー最適化．
    第29回設計工学・システム部門講演会, 日本機械学会, September 25-27, 2019, 仙台．

  31. 寒野 善博：
    テンセグリティの数理と設計問題．
    第3回デザイン科学数理知能シンポジウム「デザインの実装」， 日本建築学会, June 7, 2019, 東京.

  32. 寒野 善博：
    部材長に上限値を設けたトラスのトポロジー最適化．
    第41回情報・システム・利用・技術シンポジウム， 日本建築学会, December 6-7, 2018, 東京.

  33. 藤田 慎之輔，寒野 善博：
    構造物の釣合解析への最適化技術の適用．
    第12回コロキウム構造形態の解析と創生2018, 日本建築学会, October 18-19, 2018, 東京.

  34. 寒野 善博：
    摩擦なし接触問題に対するUzawa法の加速法．
    第31回計算力学講演会 (CMD2018), 日本機械学会, November 23-15, 2018, 徳島.

  35. 寒野 善博：
    交互方向乗数法による一様断面を有するトラスの位相最適化．
    第12回最適化シンポジウム (OPTIS 2018), 日本機械学会, October 15-16, 2018, 京都.

  36. 寒野 善博，北山 哲士：
    交互方向乗数法による混合整数非線形計画の発見的解法．
    日本オペレーションズ・リサーチ学会秋季研究発表会, September 6-7, 2018, 名古屋.

  37. 山田 裕通，寒野 善博：
    二次錐最適化による位相最適化手法の立体トラス構造物への適用．
    日本オペレーションズ・リサーチ学会春季研究発表会, March 15-16, 2018, 東京.

  38. 寒野 善博：
    DCアルゴリズムを用いたトラス構造のロバスト最適設計法．
    日本オペレーションズ・リサーチ学会春季研究発表会, March 15-16, 2018, 東京.

  39. 寒野 善博：
    接触問題．
    シンポジウム『建築構造における強非線形問題への数値解析による挑戦』, March 7, 2018, 東京.

  40. 岩井 徹，高橋 治，寒野 善博：
    テンセグリィの建築物へ適用に関する実践的研究．
    2017年度日本建築学会関東支部研究報告集, March 1-2, 2018, 東京.

  41. 遠藤 啓志，藤田 慎之輔，寒野 善博：
    シグモイド関数を用いたェル構造物の形状・板厚分布トポロジー最適化．
    第12回コロキウム構造形態の解析と創生2017, 日本建築学会, October 19-20, 2017, 東京.

  42. 藤田 慎之輔，寒野 善博：
    接合部数制約と材長を考慮した骨組トポロジーの大域的最適化．
    第12回コロキウム構造形態の解析と創生2017, 日本建築学会, October 19-20, 2017, 東京.

  43. 藤田 慎之輔，寒野 善博：
    シグモイド関数を用いたシェル構造物の形状・板厚・位相同時最適化．
    第27回設計工学・システム部門講演会, 日本機械学会, September 13-15, 2017, 下関．

  44. 寒野 善博，藤田 慎之輔：
    交互方向乗数法によるトラスの節点数制約つき位相最適化．
    第27回設計工学・システム部門講演会, 日本機械学会, September 13-15, 2017, 下関．

  45. 星野 耀，藤田 慎之輔，寒野 善博：
    柱の消失を考慮した平面骨組の部材断面最適化．
    第64回理論応用力学講演会, August 22-24, 2017, 東京.

  46. 寒野 善博：
    ロバスト最適化の視点でみるシェイクダウン解析法について．
    第39回情報・システム・利用・技術シンポジウム， 日本建築学会, December 8-9, 2016, 東京.

  47. 山岡 祐貴，大崎 純，寒野 善博：
    2次錐計画の定式化に基づく極限解析によるリンク機構の設計法．
    第39回情報・システム・利用・技術シンポジウム， 日本建築学会, December 8-9, 2016, 東京.

  48. 藤田 慎之輔，大崎 純，寒野 善博：
    Pythonの最適化ライブラリを用いた様々な構造最適化の実例．
    第39回情報・システム・利用・技術シンポジウム， 日本建築学会, December 8-9, 2016, 東京.

  49. 藤田 慎之輔，寒野 善博：
    パラメータ表現による極小曲面と平均曲率一定曲面の形態創生．
    第11回コロキウム構造形態の解析と創生2016， 日本建築学会, October 27-28, 2016, 東京.

  50. 寒野 善博：
    大規模トラスの弾塑性解析に対する加速近接勾配法．
    第12回最適化シンポジウム (OPTIS 2016), 日本機械学会, December 6-7, 2016, 札幌.

  51. 藤田 慎之輔，寒野 善博，大崎 純：
    骨組の幾何学的非線形解析に対する加速勾配法．
    第12回最適化シンポジウム (OPTIS 2016), 日本機械学会, December 6-7, 2016, 札幌.

  52. 寒野 善博：
    混合整数2次錐計画による骨組構造の離散最適化．
    第26回設計工学・システム部門講演会, 日本機械学会, October 8-10, 2016, 横浜.

  53. Y. Kanno:
    Redundancy maximization of truss structures.
    The 4th Workshop for Combinatorial Rigidity Theory and Polyhedra, Tokyo, Japan, June 18-19, 2016.

  54. Y. Kanno:
    A concept of redundancy optimization of truss structures.
    Workshop for Combinatorial Rigidity Theory, Kyoto, Japan, February 24-25, 2016.

  55. 山田 裕通，斉藤 努，石塚 広一，寒野 善博：
    二次錐最適化によるアングルトラス型鉄塔の設計．
    日本オペレーションズ・リサーチ学会秋季研究発表会, September 10-11, 2015.

  56. 寒野 善博：
    混合整数2次錐計画を用いたトラスの離散最適化法．
    第11回最適化シンポジウム (OPTIS 2014), 日本機械学会, December 12-13, 2014, 金沢.

  57. 米倉 一男，寒野 善博：
    格子ボルツマン法による流れ場の過渡的な情報を用いた流路の最適化手法．
    第11回最適化シンポジウム (OPTIS 2014), 日本機械学会, December 12-13, 2014, 金沢.

  58. 橋本 大樹，寒野 善博：
    幾何学的な不確実性を考慮したトラスのロバスト最適設計法．
    第63回理論応用力学講演会, September 26-28, 2014, 東京.

  59. 暮田 留依，寒野 善博：
    負のポアソン比をもつ周期的な骨組構造物の最適設計法．
    数学協働プログラムワークショップ「数理科学の物質・材料科学への応用」・日本応用数理学会2014年度年会（共催）, September 3-5, 2014, 東京.

  60. Y. Kanno:
    Designing counterintuitive structures via optimization: mixed-integer programming approaches.
    2014年度 第1回AIMRジョイントセミナー, 東北大学原子分子材料科学高等研究機構, April 25, 2014, 仙台.

  61. 寒野 善博：
    建築構造物における粘性ダンパーの最適配置問題に対する整数計画法．
    第26回計算力学講演会 (CMD2013), 日本機械学会, November 2-4, 2013, 佐賀.

  62. 寒野 善博：
    ロバスト性と冗長性の定量的評価法．
    建築構造設計における冗長性とロバスト性シンポジウム, June 18, 2013, 東京.

  63. 寒野 善博：
    混合整数計画を用いたテンセグリティの設計法．
    日本計算工学会 多目的最適化・満足化設計研究分科会, December 26, 2012, 東京.

  64. 寒野 善博：
    混合整数計画を用いた構造物の冗長性の評価法．
    第10回最適化シンポジウム (OPTIS 2012), 日本機械学会, December 6-7, 2012, 神戸.

  65. 菊川 翔平，大崎 純，津田 勢太，寒野 善博：
    部分剛接骨組による形態変化機構の解析と設計法．
    コロキウム構造形態の解析と創生2012, 日本建築学会, October 25-26, 2012, 奈良.

  66. 暮田 留依，寒野 善博：
    混合整数計画を用いたポアソン比が負の骨組構造物の設計法．
    第22回設計工学・システム部門講演会, 日本機械学会, September 26-28, 2012, 広島.

  67. 寒野 善博：
    場合わけを含む構造物の数理：ケーブルネットと接触問題を例にして．
    日本機械学会 宇宙工学部門『先進軽量構造システム研究会・第3回研究会』, September 6, 2012, 東京.

  68. 暮田 留依，寒野 善博：
    混合整数計画法を用いたauxetic挙動を示す構造物の設計法．
    コロキウム構造形態の解析と創生2011, 日本建築学会, October 27-28, 2011, 東京.

  69. 米倉一男，寒野 善博：
    von Mises の降伏条件に基づく弾塑性解析に対する2 次錐計画法．
    日本応用数理学会2011年度年会, September 14-16, 2011, 京都.

  70. 寒野 善博：
    構造物のロバスト最適化．
    日本オペレーションズ・リサーチ学会 第66回シンポジウム『モノづくりに活かされる知能化・最適化』, September 14, 2011, 神戸.

  71. 寒野 善博：
    塑性崩壊荷重の部材消失に対する最悪シナリオ解析法．
    第60回理論応用力学講演会, March 8-10, 2011, 東京.

  72. 寒野 善博，大崎 純：
    摩擦のない接触問題に対するウォーム・スタートを考慮した平滑化法．
    第9回最適化シンポジウム (OPTIS 2010), 日本機械学会, December 9-10, 2010, 名古屋.

  73. 米倉 一男，寒野 善博：
    不確定な外力を受けるトラスの大域的な位相最適化手法．
    第59回理論応用力学講演会, June 8-10, 2010, 東京.

  74. 米倉 一男，寒野 善博：
    錐計画問題に対する主双対内点法の厳密ペナルティ法に基づくwarm-start手法．
    統計数理研究所・研究集会「最適化：モデリングとアルゴリズム」, March 23-24, 2010, 東京.

  75. 勝見 佑平，寒野 善博：
    離散的な断面候補に対するトラスおよび骨組のトポロジー最適化．
    京都大学数理解析研究所・研究集会「21世紀の数理計画：アルゴリズムとモデリング」, July 22-24, 2009, 京都.

  76. 寒野 善博，竹脇 出：
    動的外力を受ける構造物の定常状態の不確定性解析法．
    第58回理論応用力学講演会, June 9-11, 2009, 東京.

  77. 大崎 純，寒野 善博：
    ケーブル・ストラット構造の安定解析のための最適化手法．
    第8回最適化シンポジウム (OPTIS 2008), 日本機械学会, November 27-28, 2008, pp.235-240, 東京.

  78. 寒野 善博，竹脇 出：
    不確定動的外力を受ける構造物の半正定値計画法による応答限界解析法．
    第8回最適化シンポジウム (OPTIS 2008), 日本機械学会, November 27-28, 2008, pp.59-64, 東京.

  79. 江原 慎太郎，寒野 善博：
    自己釣合条件に基づくテンセグリティの形状設計．
    コロキウム構造形態の解析と創生2008, 日本建築学会, November 20-21, 2008, 東京.

  80. 牧野 寛之，宮村 倫司，寒野 善博，大崎 純，原 靖彦：
    摩擦のない接触問題に対する内点法における線形問題への制約前処理付CG 法の適用．
    日本機械学会 第21回計算力学講演会 (CMD2008), November 1-3, 2008, 沖縄県中頭郡.

  81. 宮村 倫司，寒野 善博，大崎 純：
    Semismooth Newton法に基づく摩擦のない接触問題の実用的解法,
    日本機械学会 第21回計算力学講演会 (CMD2008), November 1-3, 2008, 沖縄県中頭郡.

  82. 江原 慎太郎，寒野 善博：
    混合整数計画を用いたテンセグリティの形状設計．
    日本オペレーションズ・リサーチ学会秋季研究発表会, September 10-11, 2008, pp.234-235.

  83. 藤田 諒，寒野 善博：
    力学におけるwedged problemの解集合の構造と列挙法．
    日本オペレーションズ・リサーチ学会秋季研究発表会, September 10-11, 2008, pp.26-27.

  84. 室田 一雄，寒野 善博，小島 政和，小島 定吉：
    An algorithm for decomposition of matrix *-algebras generated by symmetric matrices.
    京都大学数理解析研究所・研究集会「21世紀の数理計画：最適化モデルとアルゴリズム」, July 23-25, 2008.

  85. 寒野 善博，松田 悠：
    塑性崩壊荷重係数を制約とした構造物のロバスト設計法．
    第57回理論応用力学講演会, June 10-12, 2008.

  86. 寒野 善博，松田 悠：
    崩壊荷重係数を基準とした構造物のロバスト性評価法．
    「新世代計算限界と地球環境問題」ミニシンポジウム, December 3-4, 2007.

  87. Y. Kanno and M. Ohsaki:
    Form-finding of cable networks by using second-order cone programming.
    The First Hanyang-Tokyo Geometric Workshop, Seoul, Korea, November 23-24, 2007.

  88. 寒野 善博，竹脇 出：
    混合整数計画を用いた不確定外力を受けるトラスの極限解析法．
    第7回最適化シンポジウム (OPTIS 2006), 日本機械学会, December 12-13, 2006, pp.197-202.

  89. 寒野 善博，竹脇 出：
    剛性および外乱の変動に対するトラスのロバスト性能評価法．
    「新世代計算限界と地球環境問題」ミニシンポジウム, December 5-6, 2006.

  90. 宮村 倫司，寒野 善博，大崎 純：
    内点法による接触問題の求解に関する検討．
    第19回計算力学講演会, 日本機械学会計算力学部門, November 3-5, 2006, pp.69-70.

  91. 寒野 善博，竹脇 出：
    不確定な剛性および外力を有するトラスのロバスト性評価法．
    第55回理論応用力学講演会, January 24-26, 2006.

  92. 寒野 善博, J.A.C. Martins, A. Pinto da Costa:
    2次錐相補性問題に基づく摩擦を伴う接触問題の増分解析法．
    MPSシンポジウム2005, 情報処理学会, October 11-13, 2005, pp.123-130.

  93. 寒野 善博，竹脇 出：
    逐次半正定値計画法を用いたトラスのロバスト性評価および最大化設計．
    日本応用数理学会2005年度年会, September 23-25, 2005, pp.80-81.

  94. Y. Kanno and J.A.C. Martins:
    Un Programa Matem\'{a}tico com Restri\c{c}\~{o}es de Complementaridade para a Determina\c{c}\~{a}o de Traject\'{o}rias Quase-Est\'{a}ticas com Contacto e Atrito por un M\'{e}todo de Comprimento de Arco. (long-paper.pdf)
    Congresso de M\'{e}todos Num\'{e}ricos en Ingenier\'{i}a, Granada, Espa\~{n}a, July 4-7, 2005.

  95. 寒野 善博，竹脇 出：
    応力制約を有するトラスの不確定外力に対するロバスト性最大化設計.
    第54回理論応用力学講演会, January 25-27, 2005, pp.513-514.

  96. 寒野 善博，竹脇 出：
    半正定値計画法を用いた応力制約を有するトラスのロバスト性最大化．
    第6回最適化シンポジウム (OPTIS 2004), 日本機械学会, December 9-10, 2004, pp.263-268.

  97. Y. Kanno, J.A.C. Martins and A. Pinto da Costa:
    O Problema de Contacto com Atrito em Termos de Complementaridade Linear em Cones de Segunda Ordem. (long-paper.pdf) (ohp.ppt)
    Congresso de M\'{e}todos Computacionais em Engenharia, Lisboa, Portugal, May 31-June 2, 2004.

  98. 大崎 純，寒野 善博，池田 清宏：
    摂動的アプローチによる多重頂上分岐点の不整感度解析．
    第53回理論応用力学講演会, January 27-29, 2004, pp.355-356.

  99. 池田 清宏，大崎 純，寒野 善博：
    群論的頂上分岐点の安定性と初期不整感度．
    第53回理論応用力学講演会, January 27-29, 2004, pp.353-354.

  100. Y. Kanno:
    Second-order cone constraints in structural analysis.
    Max-Planck-Institut fuer Informatik, Saarbruecken, Germany, January 22, 2004.

  101. Y. Kanno:
    Energy principles of structures based on mathematical programming over symmetric cones.
    Mechanics Colloquium, Koiter Institute Delft (Delft University of Technology), Delft, the Netherlands, November 20, 2003.

  102. Y. Kanno:
    Energy principles of structures based on mathematical programming over symmetric cones.
    Semin\'{a}rios ICIST, Instituto Superior T\'{e}cnico, Lisbon, Portugal, July 10, 2003.

  103. 寒野 善博，大崎 純：
    半正定値計画法に基づく膜構造物のエネルギー原理．
    統計数理研究所・研究集会「最適化：モデリングとアルゴリズム」, March 27-28, 2003;
    統計数理研究所共同研究リポート168『最適化：モデリングとアルゴリズム 17』, 2004, pp.276-283.

  104. 寒野 善博：
    対称錐上の線形計画法に基づく構造物の解析法．
    Kyoto university Inter-Department (or Inter-Discipline) Symposium on algorithms, complexity, optimization, operations research, discrete math,... (KIDS), February 24, 2003.

  105. 寒野 善博，大崎 純：
    非線形計画法を用いたケーブルドームの応力指定形状設計法．
    第5回最適化シンポジウム (OPTIS 2002), pp.153-158, 日本機械学会, October 12-13, 2002.

  106. 寒野 善博，大崎 純，室田 一雄，加藤 直樹：
    半正定値計画法に対する主双対内点法を用いた最適設計解の群対称性．
    第51回理論応用力学講演会, January 22-24, 2002.

  107. 寒野 善博，大崎 純，室田 一雄，加藤 直樹：
    半正定値計画法に対する主双対内点法の群対称性．
    京都大学数理解析研究所・研究集会「数理最適化の理論とアルゴリズム」, July 16-19, 2001.

  108. 寒野 善博：
    2次錐計画問題によるケーブルネットの釣合形状解析法．
    Kyoto university Inter-Department (or Inter-Discipline) Symposium on algorithms, complexity, optimization, operations research, discrete math,... (KIDS), May 28, 2001.

  109. 寒野 善博，大崎 純，藤澤 克樹，加藤 直樹：
    半正定値計画法を用いた重複固有値を有するトラスのトポロジー最適化問題．
    第4回最適化シンポジウム (OPTIS 2000), pp.151-156, 日本機械学会, October 6-7, 2000.

  110. 寒野 善博，大崎 純，藤澤 克樹，加藤 直樹：
    半正定値計画法による構造最適化．
    Kansai Seminar for Mathematical Programming (KSMAP), Kyoto, September 25, 2000.

  111. 寒野 善博，大崎 純，藤澤 克樹，加藤 直樹：
    半正定値計画法を用いた構造最適設計．
    数理解析研究所講究録1114・最適化のための連続と離散数理, pp.139-148, 京都大学数理解析研究所, July 14-16, 1999.

Back